A camera system is one of the few pieces of office technology people actually notice. For businesses looking at office security cameras in Tacoma, Lakewood, or anywhere in Western Washington, the bigger risk is rarely the camera itself. It is how the system is set up and who looks after it once the installer leaves.
Here are five mistakes worth checking for, whether you are planning a new tenant space in Tacoma or living with a system someone installed years ago.
1. Recording audio without thinking about Washington law
Some cameras include a built-in microphone, which makes audio recording a setting someone has to decide on. In Washington, that decision matters.
RCW 9.73.030 makes it unlawful to record a private conversation with any device without first obtaining the consent of all the persons engaged in the conversation. The statute says consent is considered obtained when one party announces to everyone, in a reasonably effective manner, that the conversation is about to be recorded, and that the announcement itself must also be recorded.
Whether a conversation in your reception area or conference room counts as private is a legal question for your own counsel. The practical step is simple: know which cameras can capture audio, and keep it off unless counsel has approved a specific reason to turn it on. For law firms and healthcare practices, where confidential conversations happen near the front desk, this deserves a deliberate decision rather than a factory setting.
2. Leaving the default password in place
Cameras and recorders often arrive with a default administrator login. If nobody changes it, anyone who knows the default for that model may be able to sign in.
CISA, the federal cybersecurity agency, notes in its internet exposure reduction guidance that misconfigured systems, default credentials, and outdated software are often publicly accessible. Its first protective step for exposed devices is to change default passwords and enforce strong authentication. A unique password for each recorder, stored in the firm’s password manager, takes a few minutes during installation.
3. Opening cameras to the internet for remote viewing
The usual shortcut for checking the office from a phone is to open a port on the firewall so the recorder can be reached from anywhere. That also makes it reachable by anyone scanning the internet for cameras.
CISA recommends removing or restricting internet access for devices that do not need it, and using a VPN and multifactor authentication for those that must be reached remotely. In a separate alert on internet-connected cameras, CISA warned that an attacker could gain access to unsecured or poorly secured cameras to view live feeds, and recommended disabling remote access if it is not used.
Remote viewing is fine. It should go through a secure path that your cybersecurity provider manages, not an open door in the firewall.
4. Putting cameras on the same network as your computers
A camera is a small computer that rarely gets attention once it is mounted. If it shares a network with the workstations that hold client files, a weakness in the camera becomes a path toward everything else.
A better design puts the cameras and recorder on their own segment of the office network, separate from staff computers and guest Wi-Fi, with only the access each device needs. This is easiest to get right when the network is planned before you move into a new space, not added after the walls are closed.
5. Nobody owns the system after installation
Often the problem is not technical. The installer finishes, and nobody is responsible for firmware updates, a failing storage drive, or the camera that got bumped and now records the ceiling.
Decide who checks the system, how often, and how long footage is kept. Retention is a business and legal decision for your firm. The technical job is making sure the system does what the firm decided.
A quick checklist for office security cameras in Tacoma
Bring these questions to whoever manages your system:
- Which cameras can record audio, and has counsel approved it?
- Has every default password been changed?
- Can the recorder be reached from the internet, and if so, how?
- Are the cameras on their own network segment?
- Who checks recording, storage, and firmware, and when did they last do it?
FAQ
Can we record audio on our office cameras in Washington? RCW 9.73.030 requires the consent of all parties to record a private conversation, and it sets out how an announcement can provide that consent. Whether it applies to a given space is a question for your counsel.
Should our cameras be on the same network as our computers? No. Give them their own network segment so a problem with a camera stays contained.
Can we safely view our cameras from home? Yes, through a secure connection such as a VPN with multifactor authentication, rather than an open port on your firewall. If nobody uses remote viewing, turn it off.
Talk to a local team that designs and secures office systems
Graemouse has supported businesses across the South Sound and Western Washington since 2007. Along with managed IT and cybersecurity, we design and install office networks, Wi-Fi, cameras, and door access for new tenant spaces and existing offices, set up to stay patched and separate from the systems that hold client data.
Contact us or call 253.777.0763 to talk through your office.